SGM’s i-2 Green POI is a powerful IP66-rated outdoor LED wash and flood light with a narrow beam, suitable for any architectural application that requires high output over medium and long distances, thus, perfect for small to medium sized applications such as building facades, landscapes and trees, signage, and architectural features The i-2 Green POI luminaire comes with different beam angles achieved with integral holographic filters to comply with specific illumination tasks
The i-2 Green POI is an ultra-compact form-follows-function Danish designed luminaire that blends in with any contemporary or historical architecture. The body and frame is made from extruded or pressure cast marine grade aluminum, Oxsilan ® pre-treated, and powder coated to corrosion class C5-M marine grade. The front lens consists of impact resistant tempered glass with marine grade stainless steel and aluminum fixings. The scale and fan cover is made of durable material, including impact and UV resistant P6. This fixture also comes with pignose tilt locks and a scale with mark on yoke for easy installation. The pignose tilt locks can be locked in place using the included key, protecting your fixed installations from vandalism and theft.
The compact, rectangular i-2 Green POI incorporates 69 high-power Green LEDs, which delivers a bright and accurate beam projection for long-throws. Each individual lens in the i-2 Green POI is related to Green LED chips only. These optics have been designed to deliver an impressive amount of green light when illuminating structures over long distances, while performing at a very low power consumption. The LEDs expected lifetime is 50,000 hours.
The 69 individual lenses of the i-2 Green POI luminaire deliver a native 8° narrow beam, providing impact at up to 75m/250ft distance, whereas, the wider optics allow for wider uniform coverage. Its standard beam can be modified with integral holographic filters, providing a further four standard options of either 18° or 40° degree wash – or elliptical horizontal 60°/10° or elliptical vertical 10°/60° flat-field even distribution.
All i-2 POI versions are available with integral honeycomb louvre, eliminating spill light and preventing direct insight to the LED.
Variants for specific needs
The i-series is comprised of a range of fixtures to fulfill any project requirement. While this i-2 Green POI contains only Green LEDs, similar variants exist with only Red, only Blue, only White, or even UV LEDs. Lastly, the i-2 RGBW POI contains Red, Green, Blue, and White LEDs.
The IP66-rating of the i-2 Green POI luminaire ensures that the fixture is kept free from externally induced particles and liquids on internal electronics, optics, and light sources, including acidic air pollution, making it ideally suited for near- and offshore areas with high salinity. The need to clean optics is eliminated and no internal corrosion will occur. Extensive testing ensures maximum durability to vibration and physical impact.
The internal built-in dehumidifier protects this fixture from moisture, pollution, and any other factors that can generate corrosion. The patented SGM dehumidification, not only removes humidity, but also prevents oxidation and condensation, while a Gore-Tex ® membrane equalizes internal pressure to prevent leaks. POI products installed on permanent installations must always be powered on, so dehumidifiers perform properly.
This bright and accurate luminaire is optimized to manage heat in a very smart way. Like all SGM LED products, the i-2 Green POI is tested under extreme hot and cold conditions to prevent any kind of failures in outdoor or indoor environments.
The universal i-2 Green POI wash and flood light can be oriented in any position and comes with 2 x M10 fixing points and mounting bracket for bolting on the fixture. Standard accessories include half and full anti-glare shields easily fitted to remove insight to LEDs and unwanted discomfort glare and reflections. Additionally, M-10 bolts are included, which ensures the fixture can be tightly screwed to a surface, protecting it from both vandalism and theft. The M-10 bolts are suitable for any kind of custom-made bracket and are included with all POI fixtures. Omega POI style brackets are also available for additional mounting options. Being fully RDM compatible, the i-2 Green is ideal for installation in non-accessible locations.
The built-in Lumen Radio wireless DMX receiver enables the fixture to be operated both cabled and wireless. DMX/RDM is obtained through a 5m/16.4ft cable or via wireless. Power is connected through a 3 x 1½ mm2 pre-fitted 5m/16.4ft cable.To avoid operating a menu, this fixture comes with a magnet key. The magnet key can easily log off the fixture, which will force the fixture to automatically search for a new wireless transmitter. This user-friendly, wireless-setup makes it ideal for non-accessible locations, and as there are no external antennas visible, the fixture keeps its clean look, complimenting any historical or modern architectural structure.